Remote Access - D-Link DIR-842 User Manual

DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
User Manual

Remote Access

On the Advanced / Remote Access page, you can configure access to the web-based interface
of the router. By default, the access from external networks to the router is closed. If you need to
allow access to the router from the external network, create relevant rules.
To create a new rule, click the ADD button (
Figure 121. The window for adding a rule for remote management.
In the opened window, you can specify the following parameters:
Parameter
IP version
Open access from any
external host
IP address
Figure 120. The Advanced / Remote Access page.
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
Move the switch to the right to allow access to the router for any
host. Upon that the IP address and Mask fields are not displayed.
A host or a subnet to which the rule is applied. You can specify an
IPv4 or IPv6 address.
Page 155 of 210
).
Description
Configuring via Web-based Interface