Advanced - D-Link DIR-842 User Manual

DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
User Manual

Advanced

In this menu you can configure advanced settings of the router:
create or edit VLANs
•
add name servers
•
configure a DDNS service
•
configure autonegotiation or manually configure speed and duplex mode for each Ethernet
•
port of the router
setup the rate limit for traffic transmitted from every port of the router
•
limit traffic between LAN ports
•
configure notifications on the reason of the Internet connection failure
•
define static routes
•
configure TR-069 client
•
create rules for remote access to the web-based interface
•
enable the UPnP IGD protocol
•
enable the built-in UDPXY application for the router
•
allow the router to use IGMP and MLD
•
allow the router to use RTSP, enable the SIP ALG, the PPPoE/PPTP/L2TP/IPsec pass
•
through functions for the router
configure VPN tunnels based on IPsec protocol.
•
Page 138 of 210
Configuring via Web-based Interface