Table of Contents
Advertisement
Running the Setup Utility
Every time you start your computer, a message appears on the
screen before the operating system loading that prompts you to
"Hit <DEL>if you want to run SETUP". Whenever you see this
message, press the Delete key, and the Main menu page of the
Setup Utility appears on your monitor.
AMIBIOS SIMPLE SETUP UTILITY – VERSION 1.21.12
(C) 2000 American Megatrends, Inc. All Rights Reserved
Standard CMOS Setup
Advanced Setup
Power Management Setup
PCI / Plug and Play Setup
Load Optimal Settings
Load Best Performance Settings
↑ ↓ ← →: Select Item (Shift)F2 : Change Color F5 : Old Values
Esc : Quit
F6 : Optimal values
Standards COMOS setup for changing time, date, hard disk type, etc.
You can use the cursor arrow keys to highlight any of the options
on the main menu page. Press Enter to select the highlighted
option. To leave the setup utility, press the Escape key. To cycle
through the Setup Utility's optional color schemes hold down the
Shift key and press F2.
Some of the options on the main menu page lead to tables of items
with installed values. In these pages, use the cursor arrow keys to
highlight the items, and then use the PgUp and PgDn keys to cycle
through the alternate values for each of the items. Other options on
the main menu page lead to dialog boxes requiring you to answer
Yes or No by hitting the Y or N keys.
If you have already made changes to the setup utility, press F10 to
save those changes and exit the utility. Press F5 to reset the
changes to original values. Press F6 to install the setup utility with
a set of default values. Press F7 to install the setup utility with a set
of high-performance values.
Features Setup
CPU PnP Setup
Hardware Monitor
Change Password
Exit
F7 : Best performance values F10 : Save&Exit
20
Advertisement
Table of Contents
