Starter Anti-Grind Circuitry; Disabling The Remote Start System - Clifford Model RSX1.2 Owner's Manual

Clifford model rsx1.2 owner's guide

Hide thumbs Also See for Model RSX1.2:

Table of Contents

s s a a f f e e t t y y f f e e a a t t u u r r e e s s

This system has several important safety features to ensure proper

operation of the motor and prevent accidental damage to the

engine or its components.

➜

starter anti-grind circuitry

Whenever the vehicle is remote started, advanced anti-grind

circuitry prevents the starter from engaging, even if the key is turned

to the start position. This prevents damage to the starter motor if

the key is turned to the start position during remote start operation.

note: Anti-grind circuitry only works when the remote

start system is operating the motor and the Failsafe®

Starter Kill relay is installed.

➜

This feature allows your system's remote start unit to be

temporarily disabled to prevent the vehicle from being remote

started accidentally. This feature is useful if the vehicle is being

serviced or stored in an enclosed area. To disable the remote start,

move the shutdown toggle switch to the OFF position. The

switch can be installed in a location of your choice. Check with

your installer for recommended locations.

Location of Shutdown Switch____________________________

Table of Contents