Panic Mode; Valet Mode - Clifford Model RSX1.2 Owner's Manual

Clifford model rsx1.2 owner's guide

Hide thumbs Also See for Model RSX1.2:

Table of Contents

➜

panic mode

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your 2-way remote. Just

press

for 3-seconds, and you will enter Panic Mode. The

horn will honk (if connected) and the parking lights (if

connected) will flash for the programmed duration. To stop Panic

Mode at any time, press

The remote responds with one flash of the Red LED upon

entering Panic Mode and two flashes of the Red LED upon

exiting Panic Mode.

n n o o t t e e : : In order for Panic Mode to be effective, the vehicle's

horn (or optional siren) as well as the vehicle's parking

lights must be connected.

➜

You can prevent your system from automatically activating the

Failsafe

Starter Kill and locking the doors by using Valet Mode.

This is very useful when washing the vehicle or having it serviced.

In Valet Mode, the starter kill cannot be activated, even with the

2-way remote, but all convenience functions (door locks, remote

start, etc.) will continue to work normally.

To enter or exit Valet Mode:

1. Turn the ignition On.

2. Turn the ignition Off.

3. Press and release the Valet

button once within 10 seconds.

on the 2-way remote.

DRW-35

Table of Contents