Download Print this page

Sylvania SYL-06ES Owner's Manual

Window/wall-type room air conditioner

Advertisement

Quick Links

SYL-06ES

Advertisement

loading

Summary of Contents for Sylvania SYL-06ES

  • Page 1 SYL-06ES...
  • Page 2 All the illustrations in this manual are for explanation purposes only. Your air NOTE: conditioner may appear slightly different from the illustration.
  • Page 3 Keep away from firearms...
  • Page 5 Operation of Curr ent Detection Device Applicable only to units with current detection device On some products this is also indicated by a light on the plug head.
  • Page 6 Unit may vibrate and make noise because of poor wall, window construction, or incorrect installation.
  • Page 8 NOTE: The following instructions represent the Unit Controls, the same instructions apply to the Remote Control.
  • Page 9 The indicator light will be illuminated once the mode is selected. Not available in cooling only models In Fan only mode, the temperature is not adjustable. The Sleep mode program can be cancelled at any time during operation by pressing the Sleep button again.
  • Page 10 To initiate the AUTO START program, first press the Timer button which illuminates the TIMER ON indicator. To initiate the AUTO STOP program, while the TIMER ON is displayed, press the TIMER button again so that the TIMER OFF indicator light illuminates.
  • Page 13 Top rail and Sliding Panels at each side are offset to provide the proper pitch to the rear of the Unit. Place unit on floor or stable surface. When installed, the flange for securing the panel in place to the window sill, will be facing into the room. Slide the free end (I section)
  • Page 15 Styrofoam in unit should not be removed. Keeping a firm grip on air conditioner, raise sash and carefully "rock" air conditioner backward to drain any condensated water in base of unit. Becareful not to spill any remaining water while lifting unit from window.
  • Page 16 The filter may be vacuumed instead of washing.