KYMCO Agility Carry 50i Manual page 128

10
. FINAL REDUCTION
Inspect the drive shaft and gear for wear or
damage.
Check the transmission case cover bearings
for excessive play and inspect the final shaft
bearing oil seal for wear or damage.
＊
Do not remove the transmission case
cover except for necessary part
replace-ment. When replacing the
drive shaft, also replace the bearing and
oil seal.
BEARING REPLACEMENT
(TRANSMISSION CASE COVER)
Remove the transmission case cover bearings
using a bearing puller.
Remove the final shaft oil seal.
Special
Bearing Puller
Drive new bearings into the transmission case
cover.
10-3
Agility Carry / Delivery 50i
Countershaft Bearing Drive Shaft Bearing
Bearing Puller
Outer Driver, 32x35mm
Final Shaft Bearing
Oil Seal
Final Shaft Bearing
Drive Shaft Bearing
Countershaft Bearing