KYMCO Agility Carry 50i Manual page 120

9. DRIVE AND DRIVEN PULLEYS
CLUTCH/DRIVEN PULLEY
REMOVAL
Remove the drive pulley. (  9-6)
Hold the clutch outer with the universal
holder and remove the clutch outer nut.
Remove the clutch outer.
Special
Universal Holder
Remove the clutch/driven pulley assembly
Remove the drive belt from the clutch/driven
pulley assembly.
DISASSEMBLY
Hold the clutch/driven pulley assembly with
the clutch spring compressor.
Set the clutch spring compressor in a vise and
remove the 39mm clutch drive plate nut.
Loosen the clutch spring compressor and
disassemble the driven pulley assembly.
Special
Clutch Spring Compressor
Remove the seal collar.
9-7
Agility Carry / Delivery 50i
Clutch Outer
Universal Holder
Clutch/Driven Pulley
Lock Nut Wrench, 39mm
Clutch Spring Compressor
Seal Collar
Nut