Electrolux WHE7074SA Diagnostic Manual page 8

MODEL: WHE7074SA Diagnostic Manual
Displayed
code
Step "17" is skipped
in this model
ARESI1004 Issue 1
Function test Actions Availible
17
VCZ Fan
Press (CUBE) to
change the status of
the load
18 Condenser
Press (CUBE) to
Fan
change the status of
the load
20 Freezer Light
Press (CUBE) to
change the status of
the load
38 VCC
Press (CUBE) to
Compressor
change the status of
the load
47 Ice Chute
Press (CUBE) to
Heater
change the status of
the load
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
Behaver Expected
d. In case of Locked rotor condition the
refrigerator display shows "Lc"
e. In case of absence of PWM signal that
provide duty cycle, the refrigerator
display shows "Ns" when the fan is
"OF".
In case of absence of 12V signal or
f.
GND signal , the refrigerator display
shows "Np" when the fan is "on" or "Mi".
a. It is possible to run the VCZ Fan at 3
possible speeds.
b. Fan running maximum speed when "on";
medium speed when "
the "oF" is displayed
c. Press (CUBE) button to change the
status.
a. It is possible to run the Condenser Fan at
3 possible speeds.
b. Fan running maximum speed when "on";
medium speed when "
when "oF" is displayed
c. Press (CUBE) button to change the
status.
d. In case of Locked rotor condition the
refrigerator display shows "LC"
e. In case of absence of PWM signal that
provide duty cycle, the refrigerator
display shows "nS" when the fan is
"OF".
f. In case of absence of 12V signal or
GND signal , the refrigerator display
shows "nP" when the fan is "on" or "Mi".
a. Freezer light on when "on", off when
"oF"
b. Press (CUBE) button to change the
status.
a. Compressor is running at maximum
speed when "on", it is stopped when
"oF".
b. Press (CUBE) button to change the
status.
c. Chute Heater is activated when "on",
deactivated when "oF".
d. Press (CUBE) button to change the
status.
9
n
L"; stopped when
n
L"; stopped