Table of Contents
Advertisement
GAGGIA CADORNA
3.7 Milk Carafe
1
2
Emulsion chamber
Steam
Emulsified milk
3.8. Water level detection (water tank)
Water tank
Sensor
200 puls.
3
Milk
"Water low" message (water reserve)
Function:
The water level is monitored by a capacitative sensor, located one third of
the way up the water tank wall.
If the electronics assembly detects, by means of the sensor, that the amount
of water in the tank has dropped below the above mentioned level, a water
reserve remains available for the dispensing process underway (this will
cover 200 flow meter pulses).
The product dispensing process will then come to an end.
If a dispensing cycle ends after the sensor has been triggered (in the
reserve) then the display Water low" continues to be displayed during the
following dispensing cycle.
1) Steam input
2)Bring the cappuccino maker into dispensing position
3) Milk tank
The milk is heated by the steam and taken towards
the emulsion chamber where it is mixed with air and
transformed into foam
The steam passes through the pipe creating a sucking
effect that pulls the milk upwards
03 OPERATING LOGIC
5/6
Advertisement
Table of Contents
