On-Vehicle Service; Rear Axle Total Backlash Check - Mitsubishi Pajero Pinin 1999 Workshop Manual

27-6
Tool
A
C
B
Mating marks
REAR AXLE ±
Special Tools/On-vehicle Service
Number Name
MB990685 Torque wrench
MB990326 Preload socket
MB990802 Bearing installer
MB990727 Oil seal installer
MB991171 Bearing and oil
seal installer set
A: MB990926 to
MB990937 A: Installer adapter
B: MB990938 B: Bar
C: MB990939 C: Brass bar

ON-VEHICLE SERVICE

REAR AXLE TOTAL BACKLASH CHECK

1. Place the transmission shift lever and the transfer shift
2. Manually turn the propeller shaft clockwise as far as it
3. Manually turn the propeller shaft anti-clockwise as far as it
4. If the backlash exceeds the limit, remove the differential
Use
Drive pinion turning torque adjustment
Drive pinion rear bearing inner race
press-fitting
Side bearing inner race press-fitting
Drive pinion oil seal press-fitting
Oil seal press-fitting
Bearing inner and outer race removal and
press-fitting
For the details of installer, refer to GROUP 26
± Special Tool.
lever in the neutral position, apply the parking brake and
then jack up the vehicle.
will go and make mating marks on the companion flange
dust cover and the differential carrier.
will go and measure the movement of the mating marks.
Limit: 4.2 mm
carrier assembly, and then carry out the following checks.
Final drive gear backlash (Refer to P.27-16.)
Differential gear backlash (Refer to P.27-16.)