Haier DW-86L338J Service Manual page 43

product.
11.2.2 Package removal: The packaging of the product is made of wooden pallet, honeycomb corrugated film
wrapping and carton box. During handling, the forklift or pallet jack shall be inserted into the bottom for handling.
The packaging scheme is shown below.
Removal of wooden pallet:
1. Firstly, remove the fixing connector A between the machine compartment back and the wooded pallet with a
phillips screwdriver, as shown in Figure A;
2. Secondly, remove the fixing connector king bolt B between the two parts of the wooden pallet with adjustable
wrenches, as shown in Figure B;
3. Finally, the maintenance personnel push the freezer and pull out the wooden pallet according to the methods in
Figure C and Figure D.
Fixing Fixing
screw A bolt B
ULT Energy-saving Series
Fixing screw A
After-sales Service Manual
A
43