Play each note individually. The display shows the name of the note.
3.
Adjust tuning until both indicators illuminate and the needle or strobe indicate that tuning is correct.
Needle Mode
Both tuning indicators and the center green segment will illuminate when the note is
in tune.
Firmware
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate additional features and
enhancements. To take advantage of design improvements, new versions of the firmware can be downloaded and installed using the Shure Update Utility tool.
Software is available for download from http://www.shure.com/update-utility.
Connect to the Computer
Connect the device to your computer using the USB to Micro USB cable supplied with your GLX-D system.
In Tune
Flat
Sharp
GLXD4
o / on
power
GLXD6
GLXD1
GLXD2
Strobe Mode
Both tuning indicators will illuminate and the strobe segments will remain stationary