Connecting Power - Symbol CRD3100-1000 Quick Reference

Introduction
This guide presents information on the installation and charging
of the CRD3100-1000 single-slot cradle base module and the
CRD3100-4000 four-slot cradle base module, which are used
with Symbol Technologies' Series 3100 terminals.
The option to wall-mount your CRD3100-1000 and CRD3100-
4000 cradle base modules is available. You will need one wall-
mount bracket kit (p/n 62806-00-00) to wall-mount your
CRD3100-1000 single-slot cradle base module, or two kits to
wall-mount your CRD3100-4000 four-slot cradle base module.

Connecting Power

Note: The procedure for connecting power to the single-slot
cradle is the same as for the four-slot cradle.
1. Connect the power supply cord round plug to the power
connector on the side of the cradle (CRD3100-1000: power
supply p/n 59915-00-00 for domestic use, 60507-00-00 for
international use; CRD3100-4000: power supply p/n
60153-00-00 for domestic use and 60174-00-00 for
international use).
2. Connect the power supply cord AC plug to a standard
electrical outlet.
3