Table of Contents
Advertisement
Chapter 3. Operation
Factory Restore
Operation
Port Utility
Operation
3-10
This selection is used to restore the factory default set-
tings for all pass-through option module parameters.
To return the unit to the opening main menu with all the
factory default settings restored, do the following:
1.
Follow the standard operating procedure to access
the 3)UTIL menu items.
2.
With the cursor on 2)FACT RESTORE, press
The Port Utility submenu is used primarily to access the
display of the current software information for each port
installed in the unit. This information is required when
requesting assistance from ADTRAN Technical Support
or when updates are needed.
To display Figure 3-6, do the following:
1.
Follow the standard operating procedure to access
the 3)UTIL menu items.
2.
With the cursor on 6)PORT UTILITY, press
This displays the first available port.
Dual Nx56/64 Option Module User Manual
Figure 3-6. Port Utility Submenu
.
Enter
.
Enter
61200142L1-1
Advertisement
Table of Contents
