Assigning Haccp Criteria To Programs (Recipes) - Cleveland Convotherm PC-Control Operating Instructions Manual

Operating Instructions

2.3 Assigning HACCP Criteria to Programs (Recipes)

• Each Combi can store up to 250 Programs (recipes).
• CONVOTHERM PC-HACCP software can manage only 250 Programs with up to
9 steps in each.
• The same recipes must match the same number in all the networked Combis. (For
example, "grill chicken" is Program number 5 in all the networked Combis).
• Different Programs can be stored in networked Combis.
• Do not use the same number for different Programs. Instead, use the same number for the
same Program in ALL the networked Combis for a maximum of 250 Program numbers.
• In the CONVOTHERM PC-HACCP software, HACCP criteria can be allocated using
these Program numbers.
• These criteria are used to check every Program when it is started on a Combi.
1. Start the CONVOTHERM PC-HACCP software.
2. Click Program.
3. Click Program list.
NOTE: Steps 4 and 5 are not necessary if the Program was created using PC-Control
and a name is already allocated. If so, go to Step 6.
4. Select the Program number (Prog. No.) in the list on the left.
5. Enter the Program name.
6. Enter the HACCP criteria:
• CTC
Temp and time
• cooking temp
7. Click OK to save or Cancel to quit without saving.
10 July 2006
2. CONVOTHERM PC-HACCP
Temp and time
CONVOTHERM PC-HACCP
page 7