Table of Contents
Advertisement
Operating Instructions
2.1 Installing, Setting Up and Starting the Software
1. Install the CONVOTHERM PC-HACCP software and set it up to suit your hardware.
2. This software can manage two "networks" of one Combi each as a stand-alone system
or up to 31 Combis each as a network installation.
3. For each of the networks used, the interface (COM) port must be selected.
4. In the selected (see below) network, each Combi used for recording HACCP data or for
transferring Programs must be logged in.
2.1.1 Installing CONVOTHERM HACCP Software on a PC
1. Start Windows 95 or Windows NT on the PC.
2. End all other programs before installing the Convotherm software.
3. Insert the installation CD-ROM into the CD-ROM drive.
4. Use Windows Explorer to navigate to the CD-ROM drive.
5. Open the SETUP.EXE installation program.
6. Follow the instructions in the installation program.
• The required directories are created automatically.
7. When installation is complete, start the program in Explorer by clicking on
CONVOTHERM-HACCP.EXE in the selected directory.
• If there is an error beep when the program starts, correct the network interface,
and see 2.1.2.
8. In the window Responsible chef, in the field new, enter the name of the person
responsible for the HACCP documentation.
9. Click add.
10. Click OK to save or Cancel to quit without saving.
10 July 2006
2. CONVOTHERM PC-HACCP
CONVOTHERM PC-HACCP
page 1
Advertisement
Table of Contents
