dish 40.0 Remote Control Quick Start Guide

dish 40.0 Remote Control Quick Start Guide

Also See for 40.0:

Advertisement

dish 40.0 Remote Control Quick Start Guide

Turn On Your Remote

  1. Remove the PULL tab on the back of your remote
    Turn On Your Remote Step 1
  2. Open the front panel of your DISH receiver, and press the SYS INFO button
    Turn On Your Remote Step 2 Turn On Your Remote Step 3
  3. Press the SAT button on your remote control
    Turn On Your Remote Step 4
    You will hear three beeps from the remote control, indicating it has paired with your DISH receiver

Pair Your Remote

  1. Press the MENU button on your remote
    Pair Your Remote Step 1
  2. Select Settings and then Remote Control or Remote Manager
    Pair Your Remote Step 2Pair Your Remote Step 3
  3. Select TV and then TV Pairing Wizard or Lookup Code
    Pair Your Remote Step 4 or Pair Your Remote Step 5
  4. Follow the prompts
  5. If desired, pair your remote with an auxiliary device such as a Blu-ray player or stereo

Explore Your Remote

Explore Your Remote Step 1Explore Your Remote Step 2
Device Power
Turn your DISH receiver– or another device you are controlling–on or off
Input
Change your TV's input when in TV mode
Menu
Access all features
Recall
While watching TV, press to see the channels you watched recently
Info
Get more information about the program you're watching or one you've highlighted
Search
Find your favorite TV shows, movies, and sports
Colored Buttons
Access options and features available on the current menu
Picture in Picture (PiP)
Control PiP windows and their orientations
Device Buttons
Change the device you want to control: SAT (your DISH receiver), TV, DVD/Blu-ray player, or auxiliary device
Page Up & Down
Page through menus such as the Guide
TV Power
Turn your TV on or off
Cancel
Go back one menu
View Live TV
Return to the program you are watching
DVR
Access all of your recordings
Playback Control
While watching TV, use these buttons to pause, rewind, fast-forward, record, and more
On Demand
Explore thousands of free and premium movies and TV shows

Locate Your Remote Anytime

  1. Open the front panel of your DISH receiver
    Locate Your Remote Anytime Step 1
  2. Press the LOCATE REMOTE button
    Locate Your Remote Anytime Step 2

    You will hear a series of beeps from your remote, allowing you to find it

Regulatory Information

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by following one or more of the following measures:

  • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this device may void your authority to operate this equipment.

Safety Instructions

You must keep safety in mind while using this device. Keep these and any other instructions for future reference.
Observe Warnings: Carefully follow all warnings on the device and in the operating instructions.
Heat: Do NOT place the device near heat sources such as radiators, stoves, heat registers, or other appliances that produce heat.

Case and Use

Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp cloth for cleaning.
When Not in Use: Remove the batteries if this device is to be left unattended or unused for a long period of time.

This product can expose you to Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
shock hazard Refer servicing to qualified personnel when a solid object or liquid has fallen onto or into the device.
shock hazard Do NOT attempt to service this device. Refer all servicing to qualified personnel. Opening covers other than the battery cover will void the warranty.

Videos

Dish Network Remote 40 - DIY VIDEO How To Pair & Program

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download dish 40.0 Remote Control Quick Start Guide

Advertisement

Need Assistance?

Do you have a question about the 40.0 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents