dish 52.0 Remote Control Quick Start Guide

dish 52.0 Remote Control Quick Start Guide

Also See for 52.0:

Advertisement

dish 52.0 Remote Control Quick Start Guide

Turn On Your Remote

  1. Remove the back cover by pushing the tab upward, and remove the PULL tab

Turn On Your Remote Step 1Turn On Your Remote Step 2

  1. Replace the back cover
  2. Open the front panel of your DISH receiver, and press the SYS INFO button

 Open the front panel SYS INFO button

  1. Press the SAT button on the side of the remote control

SAT button
You will hear three beeps from the remote control, indicating it has paired with your DISH receiver

Pair Your Remote

  1. Press the home button twice

Press the home button

  1. Select Settings and then Remote Control

Select Settings Select Remote Control

  1. Select TV and then TV Pairing Wizard

Select TV TV Pairing Wizard

  1. Follow the prompts
  2. If desired, pair your remote with an auxiliary device such as a Blu-ray™ player or stereo

Explore Your Remote

Explore Your Remote Step 1Explore Your Remote Step 2
Home
Easily find movies, sports, and shows that are live, on your DVR, or on demand—all in one place
Back/Live TV
Press to go back one menu
Press and hold to go to live TV
Options
Access additional options and features in the current menu
Skip Backward
Press to skip back 10 seconds
Press and hold to rewind
Also, use the skip buttons to change tabs
Device Power
Turn on and off the device you've selected on the side of the remote
TV Power
When the remote is paired with your TV, this button turns it on and off
Info/Help
Press to get more information about a program Press and hold to get quick tips on most screens
Search
Find your favorite TV shows, movies, and sports
Skip Forward
Press to skip forward 30 seconds Press and hold to fast-forward
Channel Up & Down
In addition to changing channels, use these buttons to page through menus such as the Guide
Recall
While watching TV, press to see the channels you have watched recently


Device Buttons
Use your remote as a universal remote control by pairing it with your TV and an auxiliary device such as a Blu-ray™ player or stereo
Input
Change inputs on your TV when in TV mode When in SAT mode, use this button to swap picture-inpicture or multi-view windows

Locate Your Remote Anytime

  1. Open the front panel of your DISH receiver

Locate Your Remote Anytime Step 1

  1. Press the LOCATE REMOTE button

Locate Your Remote Anytime Step 2
You will hear a series of beeps from your remote, allowing you to find it

Regulatory Information

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by following one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    Changes or modifications to this device may void your authority to operate this equipment.

Safety Instructions

You must keep safety in mind while using this device. Keep these and any other instructions for future reference.
Observe Warnings: Carefully follow all warnings on the device and in the operating instructions.
Heat: Do NOT place the device near heat sources such as radiators, stoves, heat registers, or other appliances that produce heat.

Case and Use

Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp cloth for cleaning.
When Not in Use: Remove the batteries if this device is to be left unattended or unused for a long period of time.

This product can expose you to Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
shock hazard Refer servicing to qualified personnel when a solid object or liquid has fallen onto or into the device.
shock hazardDo NOT attempt to service this device. Refer all servicing to qualified personnel. Opening covers other than the battery cover will void the warranty.

Need Help?


Press and hold Info/Help


Channel 103


The Hopper Features Guide


mydish.com/support/remotes

Videos

Removing Dish 52.0 - Remote back covers (video)

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download dish 52.0 Remote Control Quick Start Guide

Advertisement

Need Assistance?

Do you have a question about the 52.0 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents