Travis Industries Fireplace Xtrordinair CoolSmart TV Manual page 42

8 Stretch the included flex to its maximum length. Measure the distance between the starter collars on the
fireplace and the inlets on the convection manifold. Cut the flex to the appropriate length and install
between the fireplace and the manifold. Secure using (3) screws at every connection and seal the joints
with silicone caulk or aluminum (U.L. 181A-P) tape.
9 Cover the face of the fireplace and the outlet of the manifold to ensure no construction debris or
sheetrock dust enters the unit.
10 Once all finish work is complete around the outlet of the manifold, install the outlet grill assembly using
the two included screws (one at each end). The grill assembly will overlap finish material up to 1-1/2"
thick. See fireplace installation manual for finishing details.
NOTE: The manifold opening protrudes 7/16" (12mm) proud of the framing. The wall may be finished to the
opening if you do not wish to use the grill trim.
Page 42 of 44
CoolSmart TV
PB24CF, PB36CF, PB36CF ST
564 25K, 564 35K, 3615HO
(sku# 98900778)
17602034- 9/8/22
Self-Drilling
Screw
© Travis Industries, Inc.