Kyocera Mita FS-C5016N Quick Reference Manual page 12

Message
Load MP Tray
†
(A4)/(PLAIN)
Memory card err
Insert again
10
Corrective Action
There is no paper cassette installed in the
printer that matches the paper size and
paper type of the print job. Set paper in the
MP tray. Press the GO key to resume
printing. (Note that feeding the paper hav-
ing a paper size which does not match the
current paper size from the MP tray can
cause paper jam.)
If you want to print from a different paper
source, press the
Use alternative and you can change
the source for paper feeding. After select-
ing a paper source and pressing the
MENU key, Paper Handling >
appears. By pressing the
type settings menu appears. After setting
the correct paper type, press the ENTER
key and printing starts. For details, see
chapter 3 of the Operation Guide.
The memory card is accidentally removed
from the printer's memory card slot during
reading. If you continue reading the mem-
ory card, insert the same memory card
into the slot again. The printer again reads
it from the beginning of the data.
Also see Insert the same memory
card.
or key to display
key, the paper