Kyocera FS-1030D Operation Manual page 31

OPERATION GUIDE
If using Folio or Oficio II paper,
remove the green stopper (1)
from the paper length guide and
fix into position on the paper
length guide (2). Pull the paper
length guide towards the rear until
it stops.
4 Load the paper in the cassette.
IMPORTANT: Always adjust the
paper length and width guides
before loading paper to avoid
skewed paper feed and/or a
paper jam.
Do not load paper above the
triangle mark located on the width
guide.
Ensure the side to be printed is
facing down and the paper is not
folded, curled, or damaged.
5
Push the cassette back into the printer until it stops.
(1)
(2)
7