Using The Camera; Accessing Camera And Video Modes - Kyocera Slider Remix KX5 User Manual

5 U
SING THE
Tips before operating your camera
• You cannot activate the camera while
on an active call or while browsing files in the
media gallery.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a "Low memory" error, check your
resolution and quality compression settings. See
"Setting up the camera for photos" on this
page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
Accessing camera and
video modes
The camera can be used with the slide open
or closed.
Slide open or closed
• Press until you hear one beep to
activate camera mode.
• Press until you hear two beeps to
activate video mode.
Setting up the camera for photos
With the slide open, select
1.
Press to select
2.
User Guide for the Kyocera Slider Remix KX5 Phone
C
AMERA
Menu Camera.
Options
Press to select
3.
Highlight an option and press
4.
– options are On, Off, or Automatic.
Flash
– options are 1280 x 1024 (best
Resolution
for printing), 640 x 480, 320 x 240 (best
for sending to email), and 160 x 120.
–
Low Light Mode
low light environments.
– options are Off (default) or 3,
Self Timer
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot
– allows you to take up to six
Multishot
multiple pictures while the camera key is
pressed and held. A tone will play each
time a picture is taken. A second tone will
play when the final picture is taken.
–
Shutter Sound
the camera takes a picture.
– allows the camera to adjust
White Balance
for different lighting. Options are Automatic,
Fluorescent, Incandescent, or Daylight.
– sets the picture compression. The
Quality
higher the compression, the better the
detail of the picture (higher pixel rate).
Options are Low, Medium, or High
(default). When set to High, the picture
file size is larger, using more memory.
.
Settings
:
brightens the picture for
mode is activated.
sets the sound used when
23