1. Connect the phone to the laptop or PC. (See
PC.")
2. Set the Com Speed.
3. Select Menu → Settings → Network → Data/Fax Calls.
4. Press
to select an option:
–
Voice only—Allow only voice calls.
–
Fax, next call or Data, next call—Set the phone to fax mode or data
mode for the next incoming call or the next 10 minutes.
–
Fax, until off or Data, until off—Force the phone into fax mode or data
mode until the phone is turned off.
Note: You cannot receive voice calls while the phone is in data/fax mode.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the hearing impaired.
Note: Enable TTY only when using the phone with a TTY device.
1. Connect the TTY device to the phone.
2. Enter
User Guide for the Kyocera Rave phone
"Connecting to a laptop or a
from your keypad.
77