Setting An Alert For Roaming - Kyocera Rave KE433 User Manual

2. Select an option and press
– Automatic automatically switches the phone between digital and analog.
– Analog only sets the phone to work in analog mode only.
– Analog call forces a call into analog mode for the duration of the next call.
– Digital only sets the phone to work in digital mode only.

Setting an alert for roaming

Depending on services available from your service provider, you may use
this setting if you want the phone to alert you when you roam outside of
your home service area.
1. Select Menu → Settings → Network → Roam/Svc Alert.
2. Select an option and press
– When no svc alerts you with three tones decreasing in pitch when service is
lost and three tones increasing in pitch when service is acquired again.
– Roam Change alerts you with two decreasing tones when roaming
service is acquired and three increasing tones when home area
service is acquired again.
– Any Change alerts you with three increasing tones if there is a change in
roaming service or three decreasing tones if the phone loses service.
User Guide for the Kyocera Rave phone
.
.
25