Remove Yourself From A Teamdc Group; Teamdc Call Information; Opt-In Teamdc - Kyocera DuraMax User Manual

Join or Rejoin a TeamDC Call
If you are not available at the beginning of a call, or if you drop off the call temporarily, you can
rejoin the in-progress TeamDC call.
1. Press > History.
2. Highlight the TeamDC entry and press the DC button.
3. Continue the TeamDC call as described previously.
Tip: You may also join or rejoin a TeamDC call from your Contacts. Select the TeamDC
group and press the DC button.
Note: If the TeamDC call has already ended, pressing the DC button initiates a new TeamDC
call.

Remove Yourself from a TeamDC Group

1. In standby mode, press CONTACTS (right softkey).
2. Highlight a TeamDC group and press OPTIONS (right softkey) > Remove Me.
3. Press REMOVE (left softkey).
Note: This action also deletes the TeamDC group you belonged to from your Contacts.
Note: TeamDC group membership can either be forced or non-forced. With a forced TeamDC
group, an end user on the same account cannot be removed from the group, whereas a
user not on the same account can.

TeamDC Call Information

During a TeamDC call, the following information may appear on your screen:
● The name of the group.
● The name or Direct Connect number of the person speaking.
● The number of TeamDC members who are connected to the call out of the number
invited (for example, 4 out of 6).

Opt-In TeamDC

Opt-In TeamDC works like a chatroom. You can make and manage Opt-In TeamDC groups in
the same way as you would for TeamDC groups on the Web. You can also send an Invite
during an Opt-In TeamDC call to the group members who have not yet joined the call. (See
Send an Invite during a
Sprint Direct Connect
call.)
48