Getting Started; Installing The Battery - Kyocera Candid KX16 User Manual

1 G S
ETTING

Installing the battery

Your phone comes with a removable lithium ion
(LiIon) battery.
To install the battery:
Hold the phone with the back facing you.
1.
Toward the bottom of
2.
the phone there is a
recess to aid you in
opening the battery
door. Use your finger to
pull the battery door
away.
Place the battery in the
3.
phone casing with the
metal contacts toward
the bottom of the phone.
Place the battery door
4.
tab in the opening near
the top of the phone.
Press the battery door
5.
until it clicks into
place.
User Guide for the Kyocera Candid KX16 Phone
TARTED
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
battery before using the phone.
To charge the battery,
connect the AC
adapter to the jack
on the bottom of the
phone, then plug the
adapter into a wall
outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Fully charge the
1