Close Charging Unit / Stänga Laddningsenheten - Siemens VersiCharge 8EM1310-2EH04-0GA0 Compact Operating Instructions

Close charging unit / Stänga laddningsenheten
Şarj ünitesinin kapatılması / Закрывание зарядного блока / Tilslutning af ladeenheden / Laadeenheid
sluiten / Latausyksikön liittäminen / Stenge ladeenhet / Fechar a unidade de carga
Put the protective cover for the electronics back in place (not seen in the figure). Make sure that the seal is
properly in place. Make sure that the cables are not pinched or kinked when you insert the charger into the
EN mounting bracket.
Lift the charger out of the wiring position and close the charging station by placing the charger on the mounting
bracket. Protect the charging unit from unauthorized opening with the supplied M3x8 screw.
VersiCharge AC Wallbox IEC
A5E50300544-AC, 11/2021
21