Pour In Sonication Fluid - BANDELIN SONOREX SUPER RK 31 Operating Manual

5.4

Pour in sonication fluid

Risk of scalding
– Do not fill the oscillating tank with hot water.
– Maximum filling temperature: 50 °C.
NOTICE
Damage caused by condensation in the ultrasound bath
At high humidity, condensation forms inside the ultrasound bath
when cold water is added.
– Do not fill the oscillating tank with cold water at high humidity.
NOTICE
If using a powder preparation, do not add it directly to the oscillat-
ing tank.
– Mix a powder preparation in another container before adding it
to the oscillating tank.
– Add the preparation to the oscillating tank only when it is com-
pletely dissolved.
8 0
Fig. 5
1 Turning knob to adjust the heating temperature
2 Filling level mark
1676-002 en/2022-05
CAUTION
1 2
°C
0
1 m in
3 0
7 0
1 5
4 0
6 0
5 0
1 3
1 0
9
4
Fill oscillating tank
3
3
5
7
/5
Operation
21/52