Component To Component Using Cx-Thermo; Wiring - Omron E5CC Quick Start Manual

Both of the units must have communication capabilities, which is the 003 or 004 option for E5CC models. Keep in mind
that copy function is only possible between the same model number and the same version of the temperature
controller. Additional products that were used include the following:
•
K3SC interface converter,
•
CS1W-CIF31 interface unit between USB serial communication and RS-232C,
•
D-SUB 9 pin connector (needs a female connection), multi-conductor cable, or K32-23209 pre-made cable,
•
CX-Thermo, and
•
S8VK-G power supply.
Below displays the wiring from the D-SUB 9 pin connector to the K3SC.

Component to Component Using CX-Thermo

Figure 4: K3SC and 9 Pin Connector Connections

Wiring

Page 8 of 37