Troubleshooting - Speed Queen Alliance DR7003WG User Manual

Troubleshooting

Try these troubleshooting tips before making a service call.
They may save you time and money.
Dryer Symptom
Dryer won't start
Dryer won't heat
Dryer doesn't dry clothes satisfactorily
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Possible Cause/Solution
• Make sure the power cord is plugged all the way into the electrical
outlet.
• Make sure loading door is closed.
• Press Start/Pause button to start dryer.
• Make sure the laundry room fuse(s) isn't blown or loose, or circuit
breakers aren't open.
• The dryer itself does not have an electrical fuse. An electric dryer
has an electrical circuit with two fuses.
• Check if motor overload protector has cycled. Wait 10 minutes and
try again.
• Electric dryers only – Some homes may have two fuses or circuit
breakers for an electric dryer; both fuses or circuit breakers should
be checked. Make sure the laundry room fuse(s) isn't blown or
loose, or that the circuit breakers aren't open.
• Make sure control is not in Cooling part of cycle, Extended LED is
lit, or that the Temp selection is not set to No Heat.
• Gas dryer only – Make sure equipment and main gas line valve is
turned on.
• Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
• Check weather hood to make sure flapper moves freely, has not
been pushed in or has not been blocked.
• Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
• Check weather hood to make sure flapper moves freely, has not
been pushed in or has not been blocked.
• Auto-Sensing cycle – Adjust Dryness selection.
• Manual cycles - Allow more or less time.
• Clean the lint filter.
• Make sure the load isn't too small. Small loads may not tumble
properly or dry evenly.
• The Auto-Sensing cycles are not suggested to be used for small
loads such as two small towels. For those loads, use the Man-
ual cycles.
• Check load being dried. Heavy items dried with lightweight items
will not dry as quickly as the rest of the load.
• Refer to Sort section for proper sorting information.
19
Troubleshooting
Table continues...
Part No. D518541ENR3