Konica Minolta PageScope Quick Manual page 30

Important!
• The local network may not be discovered when PageScope
Net Care is started up while an SNMP agent is running on the
server where PageScope Net Care is installed. If this happens,
terminate the SNMP agent or add the local network manually
to the discovery range.
5. Enter a network address and subnet mask.
To specify a range of addresses, type the applicable IP addresses
into
Discovery From
6. To remove a network from the
select it in the list and then click the
confirmation dialog box appears, click
7. If you also want discovery to find other maker's RFC-1759
Printer-MIB compatible devices, select the check box next to the
Enable Generic Device Discovery
Discovery
3 Using PageScope Net Care Client
and
Discovery To
section. Then click the
.
Discovery Network / Range
button. If a
Remove
.
OK
option in the
button.
Apply
list,
Device
19