Table of Contents
Advertisement
5-3 Receiving the Radio Signals
A. Automatic Reception
Place the watch in a stable location near a window where the radio signal can be easily
received with the 9:00 position pointing towards the transmitter. The watch will receive the
radio signals at 3 a.m. everyday. If a signal cannot be received at 3 a.m., it will try again
automatically at 4 a.m.
B. On Demand Reception (Manual Reception)
Signals can be received at any time.
Use this function when automatic reception is impossible due to changes in the reception
environment.
(Depending on the weather or noise conditions, reception can take up to 15 minutes.)
The second hand stops
at the RX position.
C. Recovery Automatic Reception
If the watch stops due to insufficient charging, expose the watch
to sunlight to recharge it. When the watch is recharged
sufficiently, it will automatically receive the radio wave once.
Please remember to keep the watch charged to prevent this
situation from occurring.
* If the lower right button A is pressed for more than 2 seconds
during reception, the reception will be cancelled and the hands
will return to their normal movement.
(1) Remove the watch from your wrist and place on a
stable surface near a window where the radio signal
can be easily received, pointing the 9:00 position in
the direction of the radio signal transmitter.
(2) Press the lower right button A for more than 2
seconds and release it when the second hand stops
at the RX position.
Button A
(3) When reception is complete, the second hand will
leave the RX position and return to normal movement.
Referring to "Confirming the Reception Status" (p. 8),
check the reception status.
10
7
Advertisement
Table of Contents
