Table of Contents
Advertisement
§6. SETTING THE TIME MANUALLY
6-1 Setting the Time
(2) Turn the crown to set the time.
With every click, each of the hands moves sequentially one minute at a time.
(Turn to the right to move forward; turn to the left to move back.)
Turn the crown quickly (more than 2 clicks) to move the hands continuously.
To stop the continuous movement, turn the crown one click to the left or right.
(3) Set the time by using a time signal and press in the crown to complete the operation.
6-2 Correcting the Time Difference
When traveling to a different time zone, the time difference can be set (in 1-hour units, ±27
hours) to match the local time using the second hand.
–5
±0
–10
–27
Example:
When going to an area with a time difference of 5 hours, align the second hand with the 5
second position.
(3) After setting the time difference, press the upper right button B once. The time difference
will be indicated and then the hands will return to their normal movement.
(If the watch is left for 60 seconds, the hands will return to their normal movement.)
(1) Pull out the crown. The second hand will align with
the 0 seconds position.
Note:
If the second hand does not align with the 0
seconds position, it is possible that the reference
position is incorrect. Refer to "Checking the
Crown
Reference Position" (p. 2), and "Correcting the
Reference Position" (p. 11).
+5
(1) Press the upper right button B once. The second
hand will stop at the 12:00 position. The second hand
+10
12:00 position indicates a time difference of ±0
hours.
Button B
* If the time difference has already been set, this time
difference is indicated.
(2) Turn the crown without pulling it out. Turn the crown
to the right by 1 click to move the second hand
ahead by 1 step. Time difference of +1 hour is set.
Turn the crown to the left by 1 click to move the
second hand back by 1 step. Time difference of -1
+27
hour is set.
13
10
Advertisement
Table of Contents
