Table of Contents
Advertisement
6-3 Correcting the Reference Position
If the reference position does not indicate "12:00:00", the reference position must be corrected.
Correct reference position
12:00:00
(3) After correcting the reference position, press in the crown to record the new reference
position.
(4) Press the upper right button B once. The hands will rapidly return to the current time.
If the watch is left for 2 minutes, the hands will return to their normal movement.
* In the event that the time is not correct, carry out "On Demand Reception" (p. 7).
§7. SOLAR POWER
7-1 Solar Power Function
This watch uses a secondary battery to store electrical energy.
When the watch is fully charged, it will maintain its accuracy for about 6 months.
<Ensuring best operation of the watch>
Always store the watch in a bright location for best results.
* Placing the watch near a window where its face can receive
sunlight or near another source of light when you are not wearing it
will ensure that the watch is regularly charged, allowing it to
maintain its accuracy.
* Wearing clothes with long sleeves makes it difficult for the watch to
get the necessary light, resulting in insufficient charging.
It is recommended that the watch be left in direct sunlight once a
month to charge it.
Note: Do not charge on surfaces that can easily become hot, such
as a car dashboard.
(1) Press the upper right button B for more than 5
seconds, and release when the second hand begins
rotating rapidly. While the hand is still moving, pull out
the crown and wait until the hand stops moving.
(2) Align the hands with the "12:00:00" reference
position.
Turn the crown one click to the right to advance the
hand by one second, and one click to the left to
retard it by one second.
Turn the crown quickly (more than 2 clicks) to move
the hands continuously.
To stop the continuous movement, turn the crown one
click to the left or right.
11
14
Advertisement
Table of Contents
