Dell PowerEdge C8220X Installation Manual page 10

C8220X_MIC5110P7120P_IG.book Page 10 Monday, August 12, 2013 5:42 PM
13
Align and insert the MIC card assembly into the front GPGPU card riser connector until the
card is fully seated.
14
Secure the MIC card to the front of the sled cover using the four M3 screws, working in a
clockwise sequence. Tighten the screws to 5.21 in-lbs.
Figure 1-8. Installing the Front MIC Card Assembly
1
3
1 M3 screws (4)
3 front GPGPU card riser
15
Align the left air baffle with the screw holes on the front of the sled cover.
16
Secure the left air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lbs.
Figure 1-9. Installing the Left Air Baffle
3
1 left air baffle
3 MIC card assembly
10
Installation Guide
2 MIC card assembly
2
1
2 M3 screws (2)
2