Table of Contents
Advertisement
Printer Status Information
This printer-dependent status information displays via Print Manager in the
printer status window when Crown Print Monitor+ is displaying a message
from the print device. Most of these messages are uppercase, and they may
vary from one print device to the next. See your printer documentation for a
complete list and description of these messages.
When this
message displays
in the Print
Manager printer
status window . . .
Print device control
panel status
messages, such as
the following:
IDLE
TONER OUT
ADJUST UPPER
BIN
PAPER JAM
28
It indicates . . .
The print device has
encountered a problem
(the status message is also
displayed on the control
panel of the print device).
See your printer
documentation for a
complete list of these
messages.
If the print job is spooled
on a local workstation, a
dialog box prompting
you to either delete or
retry the job displays.
If the print job is spooled
on a remote workstation,
the job is retried until it is
either deleted or the
printer becomes
unavailable (for
example, is busy printing
another job or goes
off-line).
Remember that if the
send request timeout
expires, then the
print job will be
terminated and
cleared from the
system.
Take this action . . .
Fix the printer problem and
then do the following:
For print jobs spooled on
a local workstation, click
the appropriate dialog
box button.
For print jobs spooled on
a remote workstation,
either wait until the error
clears or delete the job
Printer Status Information
Advertisement
Table of Contents
