ClearSounds A300 Operating Manual page 43

Recording Announcement
Record Announce1:
The default announcement is "Hello, your call cannot be taken
at the moment. To record your message, please speak after
the tone.". To change the Announcement:
1. Press the TAM soft key to display the TAM main menu
list.
2. Press the Select soft key to select Announce and then
press the Select soft key again to select Announce1.
3. Press down
Select soft key.
4. Record your announcement after the tone. Recording will
stop automatically after 3 minutes or you can confirm
and end the recording by pressing the OK soft key.
During the recording, the LCD will show "Recording...".
5. The announcement will be played back immediately. If
you do not like your message, record your announcement
again or restore it to the default one.
Record Announce2:
The default announcement is "Hello, your call cannot be
taken at the moment. Please call back later.". To change
the Announcement:
1. Press the TAM soft key to display the TAM main menu
list.
2. Press the Select soft key to select Announce and then
press down
Select soft key.
3. Press down
Select soft key.
4. Record your announcement after the tone. Recording will
stop automatically after 3 minutes or you can confirm
and end the recording by pressing the OK soft key.
During the recording, the LCD will show "Recording...".
to scroll to Record and then press the
to select Announce2 and then press the
to scroll to Record and then press the
43 – ENGLISH