ClearSounds A300 Operating Manual page 42

1. Press the TAM soft key to display the TAM main menu
list.
2. Press down
the Select soft key.
3. Press up
then press the Select soft key.
4. Press up
Announce2 and then press the Select soft key.
NOTE: Announce2 will be played if your answering machine
becomes full.
TAM Alert
A tone will sound every minute when there is a new message
and the tone will sound until messages are reviewed. This
tone will be heard when you are on a phone call for at least
60 seconds. To change this setting:
1. Press the TAM soft key to display the TAM main menu
list.
2. Press down
the Select soft key.
3. Press down
Select soft key.
4. Press up
press the Select soft key.
Announcement Settings
█
Announce1 is a conventional outgoing message that allows
the caller to leave a message. This is the "answer and
record" message.
Announce2 is an outgoing message that does NOT allow
a caller to leave a message. This is the "answer only"
message.
Each Announcement message can be up to 3 minutes.
to scroll to TAM Setting and then press
or down
or down
to scroll to TAM Setting and then press
to select TAM Alert and then press the
or down
42 – ENGLISH
to scroll to ANNC Select and
to select Announce1 or
to select Off or On and then