Install The Toner Cartridges - Konica Minolta Magicolor 2480 MF Manual

Install the Toner Cartridges

8
Before you can install the toner cartridges into your exchange printer, you
must check the position of the carousel to make sure that the toner
cartridge slot is aligned with the opening inside the printer.
If the slot in not aligned, use a pencil (as described in the removal
procedure) to press the carousel release button and manually rotate the
carousel until the slot is aligned as shown in the picture below.
9
Install each toner cartridge into the appropriate slot. The toner color is
shown on the color label inside the carousel and the color handle on the
toner cartridge.
A. Align the toner cartridge pins on either end with the slots (shown above)
in the printer. Push down on the cartridge to fit in pins on the ends of
the cartridge into the slots in printer.
B. Rotate the cartridge
down in the front.
C. Push down on the
front of the cartridge
until it locks into
position. (Click)
A
B
C
C
7