Stopwatch - Seiko SPC244P1 Instructions Manual

STOPWATCH

l The stopwatch can measure up to 60 minutes in 1/-second increments.
l After 60 minutes, it will start counting again from "0" repeatedly up to 1 hours.
l Split time measurement is available.
STOPWATCH minute hand
I Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the "0" position.
* If the STOPWATCH hands do not return to the "0" position when the stopwatch is reset to "0",
follow the procedure in " SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND
POSITION".
10
A
STOPWATCH
1/5-second hand
B
<How to reset the stopwatch>
While the STOPWATCH hands are moving
1. Press Button A to stop the stopwatch.
. Press Button B to reset the stopwatch.
While the STOPWATCH hands are stopped
One of the following stopwatch operations has been made. Reset the stopwatch
accordingly.
[When the stopwatch is stopped]
1. Press button B to reset the stopwatch.
[When the split time measurement is displayed while the stopwatch is
measuring]
1. Press button B to release the split time display. The stopwatch hands
move quickly, and then indicate the measurement in progress.
. Press button A to stop the stopwatch.
. Press button B to reset the stopwatch.
[When the split time measurement is displayed and the stopwatch is
stopped]
1. Press button B to release the split time display. The stopwatch hands
move quickly, and then stop.
. Press button B to reset the stopwatch.
11