Setting The Time And Adjusting The Stopwatch Hand Position - Seiko SPC244P1 Instructions Manual

SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION
l This watch is designed so that the following adjustments are all made with the crown
at the second click position:
1) time setting
) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust 1) and )
at the same time.
CROWN Pull out to second click when the small second hand is at the 1 o'clock
position.
1. TIME SETTING
Minute hand
Hour hand
Small
24-hour
second
hand
hand
6
CROWN
Turn to set the hour and
minute hands.
1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it
will automatically reset the STOPWATCH hands to " 0".
2. The 24-hour hand moves correspondingly with the hour hand.
3. It is recommended that the hands be set to the time a few minutes ahead of the current time,
taking into consideration the time required to adjust the STOPWATCH hand position if necessary.
4. The moment the date changes is midnight. When setting the hour hand, make sure to check
that AM/PM is correctly set by using the 24 hour hand as an AM/PM indicator.
5. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then
turn it back to the exact minute.
2. STOPWATCH HAND POSITION ADJUSTMENT
STOPWATCH
1/5-second hand
A
B
STOPWATCH minute
hand
I If the STOPWATCH hands are not in the "0"
position, follow the procedure below to set
them to the "0" position.
A
Press for  seconds or longer.
* STOPWATCH minute hand turns a full
circle.
t
B
Press repeatedly to set STOPWATCH
minute hand to the "0" position.
* The hand moves quickly if button B is
kept pressed.
t 7