Table of Contents
Advertisement
Icon/Display
x0.00,
x0000
¼, ½, », º
¸,
0000x0000
000Mbps
¾,¿
å
ƒ, š, Ÿ,
,
,
,
,
,
^ (in yellow)
Bottom and center of the screen
Icon/Display
[FUNC]
[
], [
], [
], [~], [^],
[O], [z], [{], [
], [
[±], [Ä], [
], [<], [z],
[
], [
], [
], [œ],
[
], [
], [
], [
], [/]
[£], [
]
NOTES
NOTES
• You can press the DISP button to turn off most icons and displays in the following sequence:
Only onscreen markers (when activated, A 127)
All displays on
etc.)
Checking Clips Recorded with Canon Log 3 Gamma (View Assistance)
When [Canon Log 3] gamma is used, the image displayed on the screen will appear darker than usual. You can
use the view assistance function to display an image that approximates the one that would be obtained using
[BT.709 Wide DR] gamma settings. View assistance is only applied on the camcorder screen; it will not affect
your recordings or the video signal output from the various terminals.
1 Select [LCD/VF View Assistance].
[£ Display Setup] > [LCD/VF View Assistance]
2 Select [On].
•
will appear on the screen.
Slow & fast motion recording (A 44)
Frame rate (A 42)
Video format (A 42)
Resolution (A 42)
Bit rate
Settings optimized for an optional conversion lens (A 123)
Time code/date/time recording (A 72)
Microphone attenuator (A 80)
Audio limiter (A 80)
,
Monitor channels (A 116)
,
MP4 audio format (A 74)
Magnification (A 48)
Opens the FUNC menu (A 29, 121)
Onscreen assignable button (A 92)
],
• By default, the [
Tracking (A 51)
Exposure bar (A 62)
Audio level meter (A 78)
Description
Description
Photo] function (take a photo) is assigned to the button.
Minimal displays (recording operation,
Recording Video and Photos
41
Advertisement
Table of Contents
