Table of Contents
Advertisement
Indicates that sequencing mode is enabled.
Displays the current date and time.
RC: ALL
Remote control ID display. If a remote ID is not set, the message "ALL" is
displayed.
When Overwrite is not enabled, this displays the percent of the hard disk
usage from 0-99%.
When Overwrite is enabled, the Bar will indicate with Overwrite
Continuous recording in progress.
Manual recording in progress. To set the Manual recording mode, press the
Record button on the front panel.
Motion alarm recording in progress.
Sensor recording in progress.
Table 5.1.2. Menu Items in Quick Operation Window
Icon
Search
Setup
Display
Aspect Ratio
Snapshot
Super EZ Copy
Enable Manual
Record
Advanced Menu
EZ Setup
Audio
Camera PTZ
Enabel Main
Monitor Sequence
Disable Alarm Out
Manual
Select this option to enter the Search menu.
Select this option to enter the Setup menu.
Display layout. Select between different multi-view display formats.
D8HU: 1x1, 2x2, 3x3; D16HU: 1x1, 2x2, 3x3, 4x4
Select 'Auto Stretch' or 'Pass Through'
Click this option to create a snapshot of selected channel image.
(BMP Still Image)
Direct Backup of the selected channel to USB flash drive without going
through the search mode.
Manual Record button. Click this button to enable manual recording.
Also known as Panic Record.
Select this option to start EZ Setup Wizard
Select this option to set an audio channel to output;
(Channel 1 through 4, Audio Mute).
Select this option and the PTZ user interface will appear.
Select this option to enable/disable sequence function.
Click this button to enable/disable Alarm outputs
Window where users can manually trigger the digital deterrent audio
Description
56
Advertisement
Table of Contents
