Speco D16HU User Manual page 27

① Select ONVIF for Vendor and click the SCAN button.
② Select the camera on the list and then click the register button.
③ Then, PROFILE and ONVIF setting button will be displayed on the menu.
Click PROFILE button and then the detail information of ONVIF will be searched and listed.
(If there is not one listed, the ONVIF protocol of IP CAM is not compatible with Hybrid
DVR and therefore not supported. )
④ Double click the listed profile to apply.
⑤ Enter ID and PASSWORD of IP CAM. Registration is .completed.
Under ONVIF Setup, the following can be viewed and changed: VIDEO, NETWORK, SYSTEM settings.
Menu Item
VIDEO Video, Encoder to view and change to audio settings.
NETWORK View and change Network settings.
Figure 4.1.5 ONVIF Profile Scan Window
Figure 4.1.6 ONVIF Setup Window
27
Description