Table of Contents
Advertisement
During a call
To mute or unmute the microphone, select
To put the call on hold or unhold it, select
Warning:
Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
To activate the loudspeaker, select
a compatible headset with Bluetooth connectivity, to route
the sound to the headset, select
handsfree.
To switch back to the handset, select
To end the call, select
To switch between the active and held calls, select
Swap.
Tip: When you have only one active voice call, to put the call
on hold, press the call key. To activate the call, press the call
key again.
1
To send Touch tone strings (for example, a password),
select
Options
Send touch
>
2
Enter the DTMF string or search for it in the contacts list.
30
or
.
or
. If you have attached
Options
Activate BT
>
.
.
Options
tones.
3
To enter a wait character (w) or a pause character (p),
press * repeatedly.
4
To send the tone, select OK. You can add DTMF tones to
the phone number or DTMF field in contact details.
.
To end an active call and replace it by answering the waiting
call, select
Options
To end all your calls, select
Many of the options that you can use during a voice call are
network services.
Answer or reject a call
To answer a call, press the call key or swipe
from left to right. Swipe is in use only when the touch screen
is locked.
To unlock the touch screen without answering a call, swipe
>
Swipe to unlock
the call, or send a reject call text message. The ringing tone
is muted automatically.
If you do not want to answer a call, to reject the call, press
the end key. If the call divert feature (network service) is
activated, rejecting an incoming call also diverts the call.
To mute the ringing tone of an incoming call, select Silence.
> Replace.
Options
End all
>
from right to left, and then answer or reject
© 2011 Nokia. All rights reserved.
calls.
Swipe to answer
Advertisement
Table of Contents
