Watching 3D Video - Samsung UE55F9000A User Manual

The working distance depends on the
✎
existence of obstacles (a person, metal, walls,
etc.) between the glasses and the TV and the
strength of the Bluetooth signal.
Turn off the 3D glasses while they are not in
✎
use. If you leave the 3D glasses on, the battery
lifespan decreases.
Pairing steps
1. Turn on the TV, and then move the glasses
within 19.5 inches of the TV.
2. Press the power button on the 3D glasses
briefly. The 3D glasses will power on and
pairing will start.
3. The message "3D glasses are connected to
TV." will be displayed on the TV screen when
the pairing is successfully completed.
• If pairing fails, the 3D glasses will power off.
• If the first attempt to pair fails, power the TV off
and on again and perform step 2.
• How to pair again: Press the power button on
the 3D glasses for more than 1 second.
Troubleshooting
If you encounter...
My 3D glasses do not work.
The LED keeps blinking
Specifications (Model Number: SSG-5100GB )
Shutters
Optics
Recommended
operating distance
Weight Glasses
Power Glasses
Glasses
Power consumption
Battery
Operating temperature 50 °F ~ 104 °F (10°C ~ 40°C)
Operating conditions
Custody temperature
Product specifications may be changed without notice in order to enhance product performance.
✎
The continuous operating time may differ depending on the wireless communication environment and
✎
usage conditions.
[ Recommendation ]- EU ONLY
Hereby, Samsung Electronics, declares that this 3D Active Glasses is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
This equipment may be operated in all EU countries.
• If the 3D glasses do not function, even when
• If you want to play 3D content on another

Watching 3D Video

Some 3D modes may not be available depending
on the format of the image source.
To watch in 3D, you must wear 3D Active Glasses
and turn the glasses on by pressing the power
button.
1. Go to the 3D screen. (Picture > 3D)
2. Select the 3D Mode. The 3D Mode screen
3. Set the 3D Mode of the image you want to
Try this...
Replace the battery.
The 3D glasses should be close to the TV. Make sure that the distance between the TV and your 3D
glasses is less than 19.5 feet (6m) in a straight line.
Check the 3D function settings of your TV.
The battery is dead. Replace the battery.
Liquid crystal
2 ~ 6m (6.5 to 19.5 ft)
21.5g/.76 oz. (including the battery: 24.0±0.5g/.85.±.018oz. )
One 3V lithium/manganese dioxide battery 3V(CR2025)
0.85mA (Average)
Type
Operating time
-4 °F ~ 113 °F (-20°C ~ 45°C)
English - 17
Pairing is needed again in the following
situations:
the power button is pressed, especially with a
3D TV after a repair.
Samsung 3D TV model that belongs to the D,
E, or F series released in 2011 through 2013.
You must pair the glasses with the other TV.
appears.
view.
Transmittance 36±2%
Field Rate 120 fields/second
165mAh, 3.0V (CR2025)
150 hours