Kodak A3 User Manual page 6

LEDs and Start
button
A-61563/Part #9E4779 June 2007
You can scan a document using the Start button on the flatbed.
• For i1200/i1300 Series Scanners: When you press the Start button
on the flatbed, you will get the same result as pressing the Start
button on the i1200/i1300 Series Scanner. The application that is
associated with the displayed number in the function window is
launched. By default, the displayed numbers are associated with
smart touch. The displayed numbers 1-9 are mapped to smart touch
task shortcuts 1-9.
• For i1400 Series Scanners: The i1400 Series Scanners do not have
a Start button or function window. When you press the Start button on
the flatbed, the application associated with the scanner will be
launched. By default, the Start button is associated with smart touch.
It is mapped to task shortcut #1.
If you are scanning several exception documents using the flatbed, it
may be easier to use the Start button on the flatbed to start scanning.
NOTE: Each press of the Start button results in one single image file.
LEDs
Indicator LED lights — illuminates or flashes indicating scanner
status.
• Steady green: flatbed is ready to scan.
• Steady red: indicates an error.
• Flashing green: waiting/Energy Star mode; scanning/busy.
• Flashing red: flatbed failure.
LEDs
Start button
3