Get Multi-Gig Internet With The Multi-Gig Port - NETGEAR Nighthawk AXE7300 RAXE290 User Manual

Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290
• Use Computer MAC Address. The router captures and uses the MAC address
of the computer that you are now using. You must use the one computer that the
ISP allows.
• Use This MAC Address. Enter the MAC address that you want to use.
16. Click the Apply button.
Your settings are saved.
17. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see You cannot access
the Internet on page 177.

Get Multi-Gig Internet with the Multi-Gig port

The Multi-Gig port on your router is an Ethernet port capable of speeds of up to 2.5 Gbps.
You can connect a Multi-Gig capable device to the Multi-Gig port on your router and
enjoy Multi-Gig speeds.
To set up the Multi-Gig port on your router for your Internet connection, you need the
following:
• A service provider that offers an Internet speed that's over 1 Gbps.
• A modem that supports a high-speed Ethernet port for an Internet speed that's over
1 Gbps.
To set up the Multi-Gig port on your router for your Internet connection:
1. Connect the Multi-Gig port on the router to the high-speed Ethernet port on the
modem.
2. Launch a web browser from a computer or mobile device that is connected to the
router network.
3. Enter http://www.routerlogin.net.
A login window opens.
4. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
5. Select Internet.
The Internet Setup page displays.
6. In the WAN Preference section, select the Multi-Gig Port (2.5/1 Gbps) radio button.
Specify Your Internet Settings 32 User Manual