Table of Contents
Advertisement
Using the ADS1298RECG-FE Software
3.4
ADC Register Tab
The ADC Register tab provides controls to manipulate ADC control registers of the ADS1298R. Details of
the control registers are provided in the
controls and several sub-tabs that further divide the control registers into different functions groups. The
sub-tabs are:
•
Channel Registers tab
•
LOFF and RLD tab
•
GPIO and Other Registers tab
•
Register Map tab
3.4.1
Standby and Reset Controls
The Standby control allows the user to place the ADS1298R in standby.
The Reset control allows the user to reset the ADS1298R. The Reset Mode determines which mode is
executed when the Reset control is pressed. Device Defaults resets the device to the device defaults;
Programmed Defaults resets the device, then writes the default values for using this software application.
16
ADS1298R
product
(Section
3.4.2)
(Section
3.3)
(Section
3.4.4)
(Section
3.4.5)
Figure 8. Channel Registers Tab
Copyright © 2011–2016, Texas Instruments Incorporated
datasheet. The ADC Register tab consists of a few
SBAU181B – March 2011 – Revised Janurary 2016
www.ti.com
Submit Documentation Feedback
Advertisement
Table of Contents
